Back to Journals » International Journal of Nanomedicine » Volume 6

Manufacturing of biodegradable polyurethane scaffolds based on polycaprolactone using a phase separation method: physical properties and in vitro assay

Authors Asefnejad A, Khorasani MT, Behnamghader A, Farsadzadeh B, Bonakdar S

Published 18 October 2011 Volume 2011:6 Pages 2375—2384

DOI https://doi.org/10.2147/IJN.S15586

Review by Single-blind

Peer reviewer comments 3

Azadeh Asefnejad1, Mohammad Taghi Khorasani2, Aliasghar Behnamghader3, Babak Farsadzadeh1, Shahin Bonakdar4
1Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran; 2Iran Polymers and Petrochemical Institute, Tehran, Iran; 3Materials and Energy Research Center, Tehran, Iran; 4National Cell Bank of Iran, Pasteur Institute of Iran, Tehran, Iran

Background: Biodegradable polyurethanes have found widespread use in soft tissue engineering due to their suitable mechanical properties and biocompatibility.
Methods: In this study, polyurethane samples were synthesized from polycaprolactone, hexamethylene diisocyanate, and a copolymer of 1,4-butanediol as a chain extender. Polyurethane scaffolds were fabricated by a combination of liquid–liquid phase separation and salt leaching techniques. The effect of the NCO:OH ratio on porosity content and pore morphology was investigated.
Results: Scanning electron micrographs demonstrated that the scaffolds had a regular distribution of interconnected pores, with pore diameters of 50–300 µm, and porosities of 64%–83%. It was observed that, by increasing the NCO:OH ratio, the average pore size, compressive strength, and compressive modulus increased. L929 fibroblast and chondrocytes were cultured on the scaffolds, and all samples exhibited suitable cell attachment and growth, with a high level of biocompatibility.
Conclusion: These biodegradable polyurethane scaffolds demonstrate potential for soft tissue engineering applications.

Keywords: polyurethane, tissue engineering, biodegradable, fibroblast cells

Creative Commons License This work is published and licensed by Dove Medical Press Limited. The full terms of this license are available at https://www.dovepress.com/terms.php and incorporate the Creative Commons Attribution - Non Commercial (unported, v3.0) License. By accessing the work you hereby accept the Terms. Non-commercial uses of the work are permitted without any further permission from Dove Medical Press Limited, provided the work is properly attributed. For permission for commercial use of this work, please see paragraphs 4.2 and 5 of our Terms.

Download Article [PDF]  View Full Text [HTML][Machine readable]

 

Other article by this author:

Polyurethane/fluor-hydroxyapatite nanocomposite scaffolds for bone tissue engineering. Part I: morphological, physical, and mechanical characterization

Azadeh Asefnejad, Aliasghar Behnamghader, Mohammad Taghi Khorasani, et al

International Journal of Nanomedicine 2011, 6:93-100

Published Date: 6 January 2011

Readers of this article also read:

Emerging and future therapies for hemophilia

Carr ME, Tortella BJ

Journal of Blood Medicine 2015, 6:245-255

Published Date: 3 September 2015

Methacrylic-based nanogels for the pH-sensitive delivery of 5-Fluorouracil in the colon

Ashwanikumar N, Kumar NA, Nair SA, Kumar GS

International Journal of Nanomedicine 2012, 7:5769-5779

Published Date: 15 November 2012

Cross-linked acrylic hydrogel for the controlled delivery of hydrophobic drugs in cancer therapy

Deepa G, Thulasidasan AK, Anto RJ, Pillai JJ, Kumar GS

International Journal of Nanomedicine 2012, 7:4077-4088

Published Date: 27 July 2012

Corrigendum

Jalil MA, Moongfangklang M, Innate K, Mitatha S, Ali J, Yupapin PP

International Journal of Nanomedicine 2012, 7:3279-3280

Published Date: 29 June 2012

Crystallization after intravitreal ganciclovir injection

Pitipol Choopong, Nattaporn Tesavibul, Nattawut Rodanant

Clinical Ophthalmology 2010, 4:709-711

Published Date: 14 July 2010