Back to Journals » Clinical, Cosmetic and Investigational Dentistry » Volume 3

Current knowledge about the hydrophilic and nanostructured SLActive surface

Authors Wennerberg A, Galli, Albrektsson

Published 5 September 2011 Volume 2011:3 Pages 59—67

DOI https://doi.org/10.2147/CCIDE.S15949

Review by Single-blind

Peer reviewer comments 3


Ann Wennerberg1,2, Silvia Galli2, Tomas Albrektsson2,3
1Department of Prosthodontics, Malmö University, Malmö, 2Department of Biomaterials, Gothenburg University, Gothenburg, 3Department of Materials Science and Technology, Malmö University, Sweden

Abstract: This review summarizes the present documentation for the SLActive surface, a hydrophilic and nanostructured surface produced by Straumann Company in Switzerland, and covers the results from 15 in vitro, 17 in vivo, and 16 clinical studies. The SLActive surface is a development of the large grit-blasted and acid-etched SLA surface, and is further processed to a high degree of hydrophilicity. In general, the in vitro and in vivo studies of the SLActive surface demonstrate a stronger cell and bone tissue response than for the predecessor, the SLA surface, produced by the same company. However, in most studies, this difference disappears after 6–8 weeks. In the clinical studies, a stronger bone response was reported for the SLActive surface during the early healing phase when compared with the SLA surface. However, the later biological response was quite similar for the two surfaces and both demonstrated very good clinical results.

Keywords: SLActive, surface, in vitro, in vivo, clinical results

Creative Commons License This work is published and licensed by Dove Medical Press Limited. The full terms of this license are available at https://www.dovepress.com/terms.php and incorporate the Creative Commons Attribution - Non Commercial (unported, v3.0) License. By accessing the work you hereby accept the Terms. Non-commercial uses of the work are permitted without any further permission from Dove Medical Press Limited, provided the work is properly attributed. For permission for commercial use of this work, please see paragraphs 4.2 and 5 of our Terms.

Download Article [PDF]  View Full Text [HTML][Machine readable]