skip to content
Dovepress - Open Access to Scientific and Medical Research
View our mobile site

8852

Mechanical properties of dispersed ceramic nanoparticles in polymer composites for orthopedic applications

Original Research

(3675) Views  (1334) Full article downloads

Authors: Huinan Liu, Thomas J Webster

Published Date April 2010 Volume 2010:5 Pages 299 - 313
DOI: http://dx.doi.org/10.2147/IJN.S9882

Huinan Liu, Thomas J Webster

Division of Engineering, Brown University, Providence, RI, USA

Abstract: Ceramic/polymer composites have been considered as third-generation orthopedic biomaterials due to their ability to closely match properties (such as surface, chemistry, biological, and mechanical) of natural bone. It has already been shown that the addition of nanophase compared with conventional (or micron-scale) ceramics to polymers enhances bone cell functions. However, in order to fully take advantage of the promising nanometer size effects that nanoceramics can provide when added to polymers, it is critical to uniformly disperse them in a polymer matrix. This is critical since ceramic nanoparticles inherently have a strong tendency to form larger agglomerates in a polymer matrix which may compromise their properties. Therefore, in this study, model ceramic nanoparticles, specifically titania and hydroxyapatite (HA), were dispersed in a model polymer (PLGA, poly-lactic-co-glycolic acid) using high-power ultrasonic energy. The mechanical properties of the resulting PLGA composites with well-dispersed ceramic (either titania or HA) nanoparticles were investigated and compared with composites with agglomerated ceramic nanoparticles. Results demonstrated that well-dispersed ceramic nanoparticles (titania or HA) in PLGA improved mechanical properties compared with agglomerated ceramic nanoparticles even though the weight percentage of the ceramics was the same. Specifically, well-dispersed nanoceramics in PLGA enhanced the tensile modulus, tensile strength at yield, ultimate tensile strength, and compressive modulus compared with the more agglomerated nanoceramics in PLGA. In summary, supplemented by previous studies that demonstrated greater osteoblast (bone-forming cell) functions on well-dispersed nanophase ceramics in polymers, the present study demonstrated that the combination of PLGA with well-dispersed nanoceramics enhanced mechanical properties necessary for load-bearing orthopedic/dental applications.

Keywords: nanocomposites, ceramic nanoparticles, titania nanoparticles, hydroxyapatite nanoparticles, dispersion, agglomeration, biodegradable polymer, PLGA, mechanical properties, orthopedic/dental applications






 

Other articles by Dr Thomas J Webster

Anodized 20 nm diameter nanotubular titanium for improved bladder stent applications
Bactericidal effect of iron oxide nanoparticles on Staphylococcus aureus
Biomimetic helical rosette nanotubes and nanocrystalline hydroxyapatite coatings on titanium for improving orthopedic implants
Decreased astroglial cell adhesion and proliferation on zinc oxide nanoparticle polyurethane composites
Decreased lung carcinoma cell density on select polymer nanometer surface features for lung replacement therapies
Differential effects of nanoselenium doping on healthy and cancerous osteoblasts in coculture on titanium
Enhanced endothelial cell density on NiTi surfaces with sub-micron to nanometer roughness
Enhanced endothelial cell functions on rosette nanotube-coated titanium vascular stents
Enhanced osteoblast adhesion on nanostructured selenium compacts for anti-cancer orthopedic applications
Enhanced osteoblast adhesion to drug-coated anodized nanotubular titanium surfaces
Erratum
Fructose-enhanced reduction of bacterial growth on nanorough surfaces
Greater osteoblast and endothelial cell adhesion on nanostructured polyethylene and titanium
Greater osteoblast proliferation on anodized nanotubular titanium upon electrical stimulation
Influence of nanophase titania topography on bacterial attachment and metabolism
Nano rough micron patterned titanium for directing osteoblast morphology and adhesion
Nanofunctionalized zirconia and barium sulfate particles as bone cement additives
Reduced adhesion of macrophages on anodized titanium with select nanotube surface features
Reducing infections through nanotechnology and nanoparticles
Selenium nanoparticles inhibit Staphylococcus aureus growth
Self-assembled rosette nanotubes encapsulate and slowly release dexamethasone
Self-assembled rosette nanotubes for incorporating hydrophobic drugs in physiological environments
Silver nanoparticle toxicity in Drosophila: size does matter
Spray deposition of live cells throughout the electrospinning process produces nanofibrous three-dimensional tissue scaffolds
The influence of nano MgO and BaSO4 particle size additives on properties of PMMA bone cement
The use of superparamagnetic nanoparticles for prosthetic biofilm prevention


Readers of this article also read:

Nanovectors for anticancer agents based on superparamagnetic iron oxide nanoparticles
Radiolucency below the crown of mandibular horizontal incompletely impacted third molars and acute inflammation in men with diabetes
Nanofunctionalized zirconia and barium sulfate particles as bone cement additives
Biomimetic nanoparticles: preparation, characterization and biomedical applications
Deposition of silver nanoparticles on titanium surface for antibacterial effect
Bactericidal effect of iron oxide nanoparticles on Staphylococcus aureus
Formation of silver microbelt structures by laser irradiation of silver nanoparticles in ethanol
Fungus-mediated biological synthesis of gold nanoparticles: potential in detection of liver cancer
Eudragit nanoparticles containing genistein: formulation, development, and bioavailability assessment
Elucidation mechanism of different biological responses to multi-walled carbon nanotubes using four cell lines